4. If you selected PORT at step 3, use the trackball to select a port, then press
the ENTER soft key. Make a route using the soft keys, then push the
[ENTER] knob. (If you want to go directly to that port, simply press the ADD
QP soft key followed by the [ENTER] knob.)
If you selected NEAR SRVC at step 3, select service mark desired with the
trackball and then push the ENTER soft key or the [ENTER] knob. Then, the
display shows the locations of those services nearest you. (The figure below
shows the location of filling stations in an area in southern Italy.) Use the
trackball to place the "hand cursor" on the port service icon desired, then
press the ENTER soft key. Make a route using the soft keys, then push the
[ENTER] knob. (If you want to go directly to location selected, simply press
the ADD QP soft key followed by pushing the [ENTER] knob.)
Sample filling station locations (southern Italy)
40 45.971'N
FROM
+
13 57.462'E
OS
16.0nm
PUNTA CORNACCHIA
ACCO AMENO
ISCHIA
PORTO
CASAMICCIOLA
I. ISCHIA
3. PLOTTER OPERATION
0.26 nm
GOTO
180.2 M
ENTER
CANCEL
GOTO
3-47
Need help?
Do you have a question about the COLOR VIDEO PLOTTER 1833C and is the answer not in the manual?