Customizing Your Unit; General Setup - Furuno COLOR VIDEO PLOTTER 1833C Operator's Manual

5.

CUSTOMIZING YOUR UNIT

This chapter describes the various options which allow you to set up your unit to
suit your needs. For mode-specific menus, e.g. radar, plotter and sounder, make
sure that you select the appropriate display when making changes or viewing
menu options.
5.1

General Setup

This paragraph shows you how to set up functions common to the plotter, radar
and sounder displays. This is done on the GENERAL SETUP menu, which you
may display from any mode. These items include language, key beep, units of
measurement, data sources, etc.
1. Press the [MENU] key to display the main menu.
2. Press the SYSTEM CONFIGURATION soft key.
3. Press the GENERAL SETUP soft key.
KEY BEEP
LANGUAGE
RANGE UNIT
TEMPERATURE UNIT
DEPTH UNIT
TEMPERATURE SOURCE
DEPTH SOURCE
RESET TRIP LOG
4. Press the NEXT PAGE or PREV. PAGE soft key to switch pages if
necessary.
5. Use the trackball to select item.
6. Press the EDIT soft key.
7. Use the trackball to select option desired, then press the ENTER soft key.
8. Press the [MENU] key to close the menu.
GENERAL
ON
SETUP1
ENGLISH
nm, kt
EDIT
F
ft
NMEA
NMEA
NEXT
PAGE
NO
RETURN
Page 1
General setup menu
LAT/LON DISPLAY
TD DISPLAY
SPEED
POSITION DISPLAY
TIME DISPLAY
INFRARED REMOTE MODE A
RANGE & BEARING MODE
BEARING READOUT
MAGNETIC VARIATION
Page 2
GENERAL
DD MM.MMMM'
SETUP2
LORAN C
SOG
EDIT
LAT/LON
24 HOURS
RHUMB LINE
PREV.
PAGE
MAGNETIC
AUTO 07.0 E
5-1