To do...
Enter Ethernet port view
Enable NTDP on the port
Enabling the cluster function
Follow these steps to enable the cluster function:
To do...
Enter system view
Enable the cluster function
globally
Accessing the shared FTP/TFTP server from a member device
Follow these steps to access the shared FTP/TFTP server from a member device:
To do...
Access the shared FTP server
of the cluster
Download a file from the shared
TFTP server of the cluster
Upload a file to the shared
TFTP server of the cluster
Managing a Cluster through the Management Device
You can manage the member devices through the management device, for example, adding/removing
a cluster member, rebooting a member device, logging into a member device, and so on.
Follow these steps to manage a cluster through management device:
To do...
Enter system view
Enter cluster view
Add a candidate device to the
cluster
Remove a member device from
the cluster
Reboot a specified member
device
Use the command...
interface interface-type
interface-number
ntdp enable
Use the command...
system-view
cluster enable
Use the command...
ftp cluster
tftp cluster get source-file
[ destination-file ]
tftp cluster put source-file
[ destination-file ]
Use the command...
system-view
cluster
add-member
[ member-number ]
mac-address H-H-H
[ password password ]
delete-member
member-number
reboot member
{ member-number |
mac-address H-H-H }
[ eraseflash ]
1-16
Remarks
—
Required
Remarks
—
Optional
By default, the cluster function
is enabled.
Remarks
Optional
Available in user view
Optional
Available in user view
Optional
Available in user view
Remarks
—
—
Optional
Optional
Optional