Ip Addressing Configuration; Ip Addressing Overview; Ip Address Classes - 3Com 4500 Configuration Manual

1

IP Addressing Configuration

The term IP address used throughout this chapter refers to IPv4 address. For details about IPv6
address, refer to IPv6 Management.
When configuring IP addressing, go to these sections for information you are interested in:
IP Addressing OverviewConfiguring IP Addresses
Displaying IP Addressing Configuration
IP Address Configuration Examples

IP Addressing Overview

IP Address Classes

On an IP network,
01010000100000001000000010000000 in binary. To make IP addresses in 32-bit form easier to read,
they are written in dotted decimal notation, each being four octets in length, for example, 10.1.1.1 for the
address just mentioned.
Each IP address breaks down into two parts:
Net ID: The first several bits of the IP address defining a network, also known as class bits.
Host ID: Identifies a host on a network.
IP addresses are divided into five classes, as shown in the following figure (in which the blue parts
represent the address class).
Figure 1-1 IP address classes
Table 1-1 describes the address ranges of these five classes.
a 32-bit address is
1-1
used to identify a host. An example is