Static Route Configuration Example - 3Com 4500 Configuration Manual

To do...
Display the brief information of a
routing table
Display the detailed information of a
routing table
Display the information of static
routes
Delete all static routes

Static Route Configuration Example

Network requirements
A small company requires that any two nodes in its office network communicate with each other, and
that the network structure be simple and stable. The company hopes that the existing devices that do
not support any dynamic routing protocol can be fully utilized.
In this case, static routes can implement communication between any two nodes.
Network diagram
According to the network requirements, the network topology is designed as shown in
Figure 2-1 Network diagram for static route configuration
1.1.1.1/24
Switch A
1.1.1.2/24
Host C
Configuration procedure
When only one interface of the device is interconnected with another network segment, you can
implement network communication by configuring either a static route or default route.
Host A
1.1.5.2/24
1.1.5.1/24
1.1.2.2/24 1.1.3.1/24
Switch C
1.1.2.1/24 1.1.3.2/24
Switch B
Use the command...
display ip routing-table
display ip routing-table verbose
display ip routing-table protocol static
[ inactive | verbose ]
delete static-routes all
1.1.4.1/24
1.1.4.2/24
Host B
2-3
Remarks
Available in
system view
Figure 2-1.