3Com 4500 Configuration Manual page 443

26/50-port
Hide thumbs Also See for 4500:
Table of Contents

Advertisement

Configuration procedure
Follow these steps to configure queue scheduling in system view:
To do...
Enter system view
Configure queue
scheduling
Follow these steps to configure queue scheduling in Ethernet port view:
To do...
Enter system view
Enter Ethernet port view
Configure queue
scheduling
A port of a Switch 4500 supports eight output queues. These queue scheduling algorithms are available:
SP, WRR, and WFQ. With WRR (or WFQ) adopted, if you set the weight or the bandwidth of one or
multiple queues to 0, the switch will add the queue or these queues to the SP group, where SP is
adopted. For other queues, WRR (or WFQ) still applies. In this case, both SP and WRR (or WFQ) are
adopted.
In cases where both SP and WRR (or WFQ) queue scheduling algorithms are adopted, the queues in
the SP group take precedence over other queues. For example, if queue 0, queue 1, queue 2, and
queue 3 are in the SP group, queue 4, queue 5, queue 6, and queue 7 are scheduled using WRR (or
WFQ), the switch will schedule the queues in the SP group preferentially by using the SP algorithm.
Then queues outside the SP group are scheduled by using WRR (or WFQ) algorithm only when all the
queues in the SP group are empty.
Use the command...
system-view
queue-scheduler { strict-priority | wfq
queue0-width queue1-width
queue2-width queue3-width
queue4-width queue5-width
queue6-width queue7-width | wrr
queue0-weight queue1-weight
queue2-weight queue3-weight
queue4-weight queue5-weight
queue6-weight queue7-weight }
Use the command...
system-view
interface interface-type
interface-number
queue-scheduler { wfq
queue0-width queue1-width
queue2-width queue3-width
queue4-width queue5-width
queue6-width queue7-width | wrr
queue0-weight queue1-weight
queue2-weight queue3-weight
queue4-weight queue5-weight
queue6-weight queue7-weight }
1-20
Remarks
Required
By default, the queue
scheduling algorithm adopted
on all the ports is WRR. The
default weights of the eight
output queues of a port are 1, 2,
3, 4, 5, 9, 13, and 15 (in the
order queue 0 through queue
7).
Remarks
Required
By default, the queue
scheduling algorithm adopted
on all the ports is WRR. The
default weights of the eight
output queues of a port are 1, 2,
3, 4, 5, 9, 13, and 15 (in the
order queue 0 through queue
7).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4500 pwr

Table of Contents