EPSON Stylus Pro 7000
LED INDICATORS
Table 1-23. LED Indicator Lights
LED
Status
• On
• Power on
Operate
• Flashing
• Receiving data or performing power-down
• On
• No paper loaded, end of roll, sheet/roll paper
• Flashing
Paper Out
• Paper jam, paper cutting, paper skew, or paper
• On
• Paused
• Flashing
• Performing head cleaning or the printer is in
Pause
• On
• Ink out*
Ink Out Y
• Flashing
• Ink low
• On
• Ink out*
Ink Out LM
• Flashing
• Ink low
• On
• Ink out*
Ink Out LC
• Flashing
• Ink low
• On
• Ink out*
Ink Out M
• Flashing
• Ink low
• On
• Ink out*
Ink Out C
• Flashing
• Ink low
• On
• Ink out*
Ink Out K
• Flashing
• Ink low
• On
• Auto cut selected
Roll Auto Cut
• Flashing
• Roll paper not set or roll paper and cut sheet
• On
• Roll paper will not be cut
Paper Type
• Flashing
• Roll paper not set or roll paper and cut sheet
(Cut Off)
• On
• Single sheet printing mode.
Sheet
• Flashing
• Roll paper not set or roll paper and cut sheet
Note: *Also occurs if no cartridge is installed or the wrong cartridge is installed.
Product Description
Condition
sequence
error, paper set lever is in release position, or
the loaded paper is too thick for cleaning
check error
ink drying phase. Also flashes during ink
charging operation.
sizes are different
sizes are different
sizes are different
Control Panel
Revision B
35