Epson Stylus PRO Color Large Format Inkjet Printer 7000 Service Manual page 151

EPSON Stylus Pro 7000
4.2.3.20 Removing the CR_HP Sensor
1. Remove the R Side Cover as described in "R Side Cover Removal" on
page 114.
2. Push the carriage lock using your finger to unlock the carriage and move
the carriage from the home position to the left.
3. Disconnect the harness from the CR_HP Sensor connector.
4. Release the hook fixing the CR_HP Sensor and remove the CR_HP Sensor.
Hooks
Figure 4-77. Removing the CR_HP Sensor
Disassembly & Assembly
CR_HP
Connector
Sensor
Disassembly Flow
Revision B
151