Warnings - Epson Stylus PRO Color Large Format Inkjet Printer 7000 Service Manual

Color large format inkjet printer
Table of Contents

Advertisement

EPSON Stylus Pro 7000
Table 3-4. Warning/Error Messages
Error Type
Message
Warning
Error
Push Lever Down
Note: "Maintenance Call nnnn" is described in Table 3-3.
Troubleshooting
Refer to
page 99
page 99
page 100
page 100
page 100
page 100
page 101
page 101
page 101
page 102
page 102
page 102
page 103
page 103
Troubleshooting Using the Error Messages

WARNINGS

Warning messages appear on the LCD display to warn users that a problem
may occur. The printer can still print and there is no effect on print quality;
however the messages do not go away until the possible problem is taken
care of or the printer enters the corresponding error condition. For example,
the Waste Ink Pads Near Full message will remain until the pads are replaced
and the counter is reset or until the pads become full and the printer enters an
error state.
Table 3-5. Ink Low
Item
LCD
Ink Low
message
LED indicator
The LED indicator for the ink cartridge that is low flashes.
status
The printer has received the Near-End signal from one of the ink
low sensors. After the LCD displays the Ink Low warning, the
printer can print about one A1 sheet at 100% duty. By all means,
change the ink cartridge as soon as possible.
Details
Once a "low-ink" cartridge has been removed, it will
automatically cause an ink-end error if replaced in the printer.
Only replace empty or low cartridges with new, full cartridges;
otherwise the ink counter cannot perform correctly.
Recovery
Replace the old ink cartridge with a new one.
Revision B
Description
85

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus pro 7000 series

Table of Contents