Clean Head (Drain Ink) - Epson Stylus PRO Color Large Format Inkjet Printer 7000 Service Manual

EPSON Stylus Pro 7000

CLEAN HEAD (DRAIN INK)

This function allows you to drain the ink from the ink delivery system
including the printheads. Perform the Clean Head function before moving the
printer.
Adj Clean Head
Enter
Please Remove Ink
Remove all ink cartridges.
Draining Ink
Set Cleaning Jig
Insert transportation fluid cartridges
Cleaning
Please Remove Ink
Remove transportation fluid cartridges
Cleaning
Proceed to next
Adjustment
menu
Figure 5-40. Ink Drain Operation
Adjustment
Requires
approx. 6
minutes
Requires
approx. 6
minutes
Requires
approx. 6
minutes
Self-Diagnostic Mode Menus
After draining the ink and performing any necessary
operation and/or moving the printer, be sure to perform
the initial ink charge as described in "Cleaning Menu" on
page 194.
The term cleaning jig means the EPSON original
transportation fluid cartridge (x6 per operation). P/N =
1045585
After transporting/servicing the printer, install new ink
cartridges.
Revision B
193