D/A Revision And Head Signal - Epson Stylus PRO Color Large Format Inkjet Printer 7000 Service Manual

EPSON Stylus Pro 7000
Record: Maintenance menu
[Pause] returns you
to previous menu
[SelecType]
Fire B: XXXX
Fire C: XXXX
Fire M: XXXX
Fire Lc: XXXX
Fire Lm: XXXX
Fire Y: XXXX
Cut: XXXX
Cut Solen XXXX
Lock Solen XXXX
Waste Ink R: XXXX
Waste Ink L: XXXX
HeadWiper R: XXXX
HeadWiper L: XXXX
Figure 5-12. Maintenance History Menu
NOTE: The options above appear on the LCD starting from "Waste
Ink R".
Adjustment
Wiper XXXX
HeadRubingR XXXX
HeadRubingL XXXX
Rubbing XXXX
Lever XXXX
Cover XXXX
Ink Lever R: XXXX
Ink Lever L: XXXX
CR Motor XXXX
PF Motor XXXX
Ink Tube XXXX
PrintNumber XXXX
Cleaning XXXX
[Item]
Self-Diagnostic Mode Menus
Table 5-9. Maintenance Record Items
Item
Amount of ink fired from nozzles in number of megadots (x
Fire x
= which color)
Cut Number of times cutter has been used
Cutter Solenoid Number of times cutter solenoid has been activated
Lock Solenoid Number of times CR lock solenoid has been activated
Waste Ink R/L Amount of waste ink (right or left)
Head Wiper R/L Number of times head wiping operation has occurred
Wiper Number of times wiper has been used
Head Rubbing R/L Number of times B/C head rubbing operation has occurred
Rubbing Number of times rubbing pad has been used
Number of times paper has been set (up and down = one
Lever
time)
Number of times front cover has been opened (open and
Cover
close = one time)
Ink Lever R/L Not used
CR Motor Accumulated travel distance of carriage (in Km)
Accumulated travel distance of paper feed mechanism (in
PF Motor
Km)
Ink Tube Number of carriage passes
Accumulated printout count (each Form-Feed code = one
Print Number
printout)
Cleaning Accumulated number of cleaning operations

D/A REVISION AND HEAD SIGNAL

For factory use only to check the head voltage and pulse. Do not use.
Revision B
Description
173