Removing The Housing - Epson Stylus PRO Color Large Format Inkjet Printer 7000 Service Manual

EPSON Stylus Pro 7000

4.2.1 Removing the Housing

This sections describes the removal procedure for printer housing parts. See
below for an illustration of the housing parts.
Roll Cover
Assembly
H Top Cover
L Side
Cover
Front Cover
Assembly
Figure 4-3. Housing Part Diagram
Disassembly & Assembly
Upper Paper Guide
(behind H Top Cover)
R Side Cover
Lower Paper
Guide
4.2.1.1 Panel Unit Removal
1. Release the clips on both sides of the control panel unit and pull slightly
away from the R Side Cover.
You may find it easy to remove the control panel if you stand
on the side of the printer and use both hands to pull (squeeze)
the panel towards. This way you remove first the left-side
hook, then you can easily remove the right-side and rear
hooks.
Figure 4-4. Panel Unit Removal 1/2
Disassembly Flow
Revision B
Hooks
Panel
Unit
113