Table of Contents
Advertisement
EPSON Stylus Pro 7000
9. Remove one screw (CUPS M3x6) securing the Cover-open sensor to the
rear of the I/C Holder Frame. Then remove the Cover-open sensor.
I/C Holder Frame
One screw
(M3x6)
Figure 4-51. Cover-Open Sensor & Holder Frame Removal - R side
10. Remove one screw (CUPS M3x6) and one screw (CUPS M4x6) securing
the I/C Holder Frame on the right side.
11. Remove one screw (CUPS M3x6) and one screw (CUPS M4x6) securing
the I/C Holder Frame on the left side.
Figure 4-52. Holder Frame Removal - L side
Disassembly & Assembly
Cover-open
sensor
One screw
One screw
(M4x6)
I/C Holder
Frame
One screw
(M3x6)
One screw
(M4x6)
Disassembly Flow
12. Remove six screws (CUPS M3x6) and two screws (CUPS M4x6) securing
the I/C Holder Frame on the top.
Two
screws
Figure 4-53. Holder Frame Removal - top
13. Remove the Ink Cartridge sensor cables from their harness connectors
and separate them.
Revision B
Six screws
138
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Stylus PRO Color Large Format Inkjet Printer 7000 and is the answer not in the manual?