Next Step—Configuration
Powering On the WLSE
Next Step—Configuration
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
3-16
To turn the WLSE's power on, press the power switch. To turn its power off, press
and hold the power switch for at least four seconds. See
for the location of the power switch.
The system begins booting and sending messages to the console window. When
the login prompt appears, you can configure the system.
Run the setup program and perform basic configuration—See
Setup—CiscoWorks 1105/1130/1130-19."
Chapter 3
Installing WLSE 1130-19 Hardware
Figure 1-1 on page 1-3
Chapter 4, "Basic
78-16345-01