Upgrade Versions; Backing Up The Wlse; Downloading The Upgrade Image - Cisco CiscoWorks Wireless LAN Solution Engine Installation And Configuration Manual

Upgrade Versions

Upgrade Versions

Backing Up the WLSE

Note

Downloading the Upgrade Image

Step 1
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
A-2
You can upgrade directly to WLSE 2.7 as follows:
From WLSE 2.0 to WLSE 2.7
•
From WLSE 2.0.2 to WLSE 2.7
•
From WLSE 2.5 to WLSE 2.7
•
If you are using an earlier version, such as 1.x or 1.3.x, and you want to upgrade
directly to 2.7, see Upgrading from the Recovery CD, page
Before upgrading WLSE software, back up the configuration. The upgrade
attempts to preserve the WLSE database, but a backup is needed in case of errors
during the upgrade. See the online help or the User Guide for the CiscoWorks
Wireless LAN Solution Engine, Release 2.7.
You cannot restore a backup from a WLSE 1130-19 or WLSE 1130 to a
WLSE 1105.
Unless you are upgrading from the recovery CD, you must download the upgrade
files from Cisco.com.
Procedure
Locate the files by using the following URL:
www.cisco.com/en/US/products/sw/cscowork/ps3915/prod_upgrades_and_down
loads.html
Appendix A Installing Software—CiscoWorks 1105/1130/1130-19
A-11.
78-16345-01