Configuring Netscape Navigator - Cisco CiscoWorks Wireless LAN Solution Engine Installation And Configuration Manual

Configuring the Web Browser
Step 4
Step 5
Step 6
Note

Configuring Netscape Navigator

Step 1
Step 2
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
4-10
Change the default font to improve readability:
a. Select General. Then elect Fonts.
Select a sans-serif font (for example, Arial) from the Web page font and
b.
Plain text font lists.
Click OK, then click OK again.
c.
The text in the browser window is redrawn using the new fonts. Not all of the
fonts will change after this user-defined font option is set.
Disable caching:
Select General. Then s elect Settings.
a.
Under "Check for newer versions of stored pages," select Every visit to
b.
the page.
Click OK.
Windows XP does not come with the Java Plug-in installed on Internet
Explorer 6.0. This causes problems when upgrading a WLSE to 2.5 software.
If you plan to use a Windows XP client or server to update WLSE software,
configure the browser as described in the procedure for creating a remote
repository in the online help or in the User Guide for the CiscoWorks Wireless
LAN Solution Engine, Release 2.7.
To configure Netscape Navigator 7.01 or 7.02, perform the following steps:
Select Edit > Preferences.
Enable JavaScript:
Expand Advanced and select Scripts & Plugins.
a.
Under "Enable JavaScript for," select Navigator.
b.
Click OK.
c.
Chapter 4 Basic Setup—CiscoWorks 1105/1130/1130-19
78-16345-01