Adding Aaa Servers To The Wlse - Cisco CiscoWorks Wireless LAN Solution Engine Installation And Configuration Manual

Adding AAA Servers to the WLSE

Adding AAA Servers to the WLSE
Step 1
Step 2
Step 3
Step 4
Step 5
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
6-6
Chapter 6 Setting Up Discovery and Device Management—CiscoWorks 1105/1130/1130-19
Use the following procedure to add information about all AAA servers to be
monitored by the WLSE. For information about configuring an AAA server for
monitoring, see Setting Up AAA Servers, page
Select Devices > Discover > AAA Server.
Select the server type: EAP-MD5, LEAP, PEAP, or RADIUS.
Complete the following:
Text Box Description
Server Name Hostname or IP address of an AAA server to be added.
Note
Server Port Port on the server used for authentication; use port 1645.
Username Client username that you entered on the AAA server.
Password Client password that you entered on the AAA server.
Secret Shared secret key that you entered on the AAA server.
Click Save.
Repeat Steps 2-4 for each AAA server you want to add.
For more information on AAA servers, see the WLSE online help.
Depending on how your network is set up, the AAA
server can be a Cisco Secure Access Control Server or
a Cisco Access Registrar RADIUS server.
5-25.
78-16345-01