Rejecting Fax Reception - Canon PIXMA MX320 Manual

Rejecting Fax Reception

> >
Advanced Guide Faxing Sending/Receiving Faxes Using the Operation Panel of the Machine
Reception
Rejecting Fax Reception
You can set the machine to reject faxes with no sender information or those from specific senders.
Select one of the following conditions to reject faxes.
Faxes with no caller identification.
Faxes from senders not registered to the coded speed dial codes.
Faxes from senders registered in the machine as rejected numbers.
1.
FAX button, then press the
Press the
The Fax settings screen is displayed.
2.
Use the
3.
Use the
4.
Use the
5.
Use the
button.
You can select one of the three conditions below.
No sender info.*
Rejects faxes with no caller identification.
Coded dial unset*
Rejects faxes from the senders not registered to coded speed dial codes.
* This setting may not be available depending on the country or region of purchase.
Rejected numbers
Rejects faxes from the senders registered in the machine as rejected numbers.
If you select Rejected numbers, follow the procedure below to register a fax/telephone number to
reject.
1.
Select Yes for Register rejected no.?.
The screen for registering a rejected number is displayed.
2.
Use the
button.
3.
Use the Numeric buttons to enter the fax/telephone number to reject, then press
the button.
OK
Menu
button to select Reception settings, then press the OK button.
button to select Fax reception reject, then press the
button to select ON, then press the OK button.
button to select the fax rejection condition, then press the
button to select the dial code to register, then press the
> Rejecting Fax
button.
OK
Page 595 of 817 pages
button.
OK
OK