Reducing Or Enlarging A Copy - Canon PIXMA MX320 Manual

Reducing or Enlarging a Copy

> Printing Using the Operation Panel of the Machine
Advanced Guide
a Copy
Reducing or Enlarging a Copy
1.
Make sure that the machine is turned on.
2.
Press the COPY button.
3.
Load paper.
4.
Load the original document on the Platen Glass or in the ADF.
Note
Refer to
Loading Paper / Originals
ADF.
5.
Press the Settings button.
6.
Use the button to select the reduction/enlargement method, then press the
button.
OK
Ex:
Note
Some of reduction/enlargement methods are not available depending on the copy method.
Preset ratio
You can select one of the preset ratios to reduce or enlarge copies.
(A) A5
(B) A4
Use the button to select a preset ratio to match the size of your original document and
printing paper, then press
Magnification
You can specify the copy ratio as a percentage to reduce or enlarge copies.
(A) 125%
Use the
button or the Numeric buttons to specify the reduction or enlargement ratio (25 - 400
%), then press OK button.
Press and hold down the
.
repeat
Fit to page
The machine automatically reduces or enlarges the image to fit the page size.
for how to load the original on the Platen Glass or in the
OK button.
button to quickly advance through the ratios. For details, refer to
> Copying > Making Copies > Reducing or Enlarging
Page 329 of 817 pages
Key