Canon PIXMA MX320 Manual page 652

Attaching to and Removing from the Printer
> About Bluetooth Communication
Advanced Guide
from the Printer
Attaching to and Removing from the Printer
Attaching the Bluetooth Unit to the Printer
Removing the Bluetooth Unit from the Printer
Attaching the Bluetooth Unit to the Printer
Attach the Bluetooth unit to the Direct Print Port (A) of the printer in accordance with the following
procedure.
The external appearance may differ depending on the printer you are using.
1.
Make sure that the printer is turned on.
Make sure that any lamp on the Operation Panel is lit.
2.
Insert the Bluetooth unit to the Direct Print Port of the printer.
Detach the cap from the Bluetooth unit. Store the cap in a safe location.
Note
When the Bluetooth unit is properly attached to the printer with the Power lamp, the
> Preparation to Use the Bluetooth Unit
Page 652 of 817 pages
> Attaching to and Removing