Canon PIXMA MX320 Manual page 17

How to Navigate Menus on the LCD
2
Bottom cleaning*
*2 For details on the Bottom cleaning, refer to the on-screen manual:
.
Guide
Basic Operation on the Setting Options
You can change the settings in each mode by pressing the Settings button, when printing in the copy
mode or fax mode or when saving scanned data on a USB flash drive in the scan mode.
You can change the print settings such as page size, media type, etc.
This section describes the procedure to change the settings, taking the procedure to specify
4"x6"(10x15cm) for the page size in the copy mode as an example.
When printing from a computer, see
Note
To change the settings when printing from a PictBridge compliant device or wireless communication
device, refer to the on-screen manual:
1.
Display the setting options.
Press the COPY button to switch to the copy mode.
(1)
Press the Settings button repeatedly until Page size appears.
(2)
2.
Change the setting.
Use the
(1) (-) or
Example: Select 4"x6"(10x15cm) here.
Press the OK button.
(2)
Note
To change setting other than Page size, press the
option appears.
For details on the setting options specified by the Settings button
For the settings in the copy mode, see
For the settings in the fax mode, see
You can also change the image quality or density of sending faxes with the FAX Quality
button.For details, see
Printing from Your Computer
.
Advanced Guide
(+) button to select the page size.
Settings
Changing the Settings
Preparing for Receiving a Fax
Sending a Fax with the Numeric Buttons
Advanced
.
button repeatedly until the desired
.
.
.
Page 17 of 817 pages
Page top