Canon PIXMA MX320 Manual page 98

Loading a Document in the ADF
> Loading Paper / Originals
Contents
Loading a Document in the ADF
Load a document to copy, fax, or scan in the ADF.
Note
To scan a document at optimum quality, load it on the Platen Glass.
1.
Make sure that any original has been removed on the Platen Glass.
2.
Load a document in the ADF.
(1) Open the Document Tray.
Insert the document in the Document Tray until it beeps.
(2)
Load the document with the side to copy, fax, or scan FACING UP in the Document Tray.
Note
When Alarm volume is set to OFF, the alarm will not beep even if the document is inserted
in the Document Tray.
Adjust the Document Guides to match the width of the document.
(3)
Do not slide the Document Guides too hard. The originals may not be fed properly.
> Loading Originals > Loading a Document in the ADF
Advanced Guide Troubleshooting
Page 98 of 817 pages