A.1 Installation Conditions - Fujitsu SPARC ENTERPRISE M9000 Service Manual

A
A P P E N D I X
System Configuration
This appendix describes the installation conditions and configuration of the SPARC
Enterprise server.
A.1 Installation Conditions
The basic component of a domain configuration is the system board. The system
board consists of only a single CPU/Memory Board Unit (CMU), or it consists of one
CMU and one I/O Unit (IOU).
The system board mounting conditions are as follows:
CPU Module (CPUM)
■
Mount either two sets of two CPUMs, or one set of four identical CPUMs on the
CMU.
In the SPARC Enterprise M8000/M9000 server, the SPARC64 VI processor and
SPARC64 VII processor can be mounted together.
The following four CPUM combinations are supported as system board
configurations:
(1)
CPU0-SPARC64 VI
CPU1-SPARC64 VI
CPU2-SPARC64 VI
CPU2-SPARC64 VI
(2)
CPU0-SPARC64 VI
CPU1-SPARC64 VI
CPU2-SPARC64 VII
CPU3-SPARC64 VII
(3)
CPU0-SPARC64 VII
CPU1-SPARC64 VII
CPU2-SPARC64 VI
CPU3-SPARC64 VI
(4)
CPU0-SPARC64 VII
CPU1-SPARC64 VII
CPU2-SPARC64 VII
CPU3-SPARC64 VII
A-1