Fujitsu SPARC ENTERPRISE M9000 Service Manual page 191

Lever Up the CPU Module
FIGURE 6-16
Caution – When tilting the CPU Module insertion/extraction tool toward the
DIMM, do not tilt it to such an extent that the CPU Module is raised beyond its limit
height.
Caution – Be sure not to remove the tool before removing the CPU Module.
Otherwise, the CMU may be damaged.
c. Slide the CPU Module upward at an inclined angle to remove it from the
guide lock.
Chapter 6 Replacement of CPU/Memory Board Unit (CMU), CPU, and DIMM 6-33