Fujitsu SPARC ENTERPRISE M9000 Service Manual page 114

Diagnostic tests for FAN_A#0 have started.
[This operation may take up to 2 minute(s)]
(progress scale reported in seconds)
---------------------------------------------------
Maintenance/Replacement Menu
Status of the replaced unit.
FRU
-------------
FAN_A#0
---------------------------------------------------
The replacement of FAN_A#0 has completed, normally.[f:finish] :f
---------------------------------------------------
Maintenance/Replacement Menu
Please select a type of FRU to be replaced.
1. FAN
2. PSU
---------------------------------------------------
Select [1,2|c:cancel] : C
XSCF>
When the tests are complete the program will return to the original menu. Select
cancel to return to the XSCF Shell prompt.
Note – The display may vary depending on the XCP version.
4-14 SPARC Enterprise M8000/M9000 Servers Service Manual • June 2010
0..... 30..... 60.....
Status
--------
Normal
(Fan Unit)
(Power Supply Unit)
90.....done