Dimm Mounting Conditions - Fujitsu SPARC ENTERPRISE M9000 Service Manual

FIGURE 6-24
the Type field.
Example of Reading DIMM Information
FIGURE 6-24
MEM#00A Status:Normal;
+ Code:2cffffffffffffff0836HTF25672Y-53EB1 0100-d409da25;
+ Type:2B; Size:2 GB;
6.5.2.2

DIMM Mounting Conditions

Memory modules are added in sets of 16 DIMMs.
■
The DIMMs mounted in the MEM#xxA slot are defined as Group A. The DIMMs
■
mounted in the MEM#xxB slot are defined as Group B. The standard memory
modules are included in Group A.
The memory size of Group A is equal to or greater than that of Group B.
■
Group B need not always include memory modules.
■
Mount memory modules of the same size and rank in each group. Memory
■
modules of different sizes or ranks cannot be mounted in a single group.
Note – When you upgrade using larger capacity memory than the capacity of
Group-A, move the memory mounted in Group-A to Group-B, and then mount the
upgrade memory to Group-A.
6-42 SPARC Enterprise M8000/M9000 Servers Service Manual • June 2010
shows an example of how to read the DIMM information displayed in
Memory slot No.
DIMM size
1: 1 GB
2: 2 GB
4: 4 GB
. . .
DIMM rank
A: 1 rank
B: 2 rank