Fujitsu SPARC ENTERPRISE M9000 Service Manual page 277

Removing the XSCFU (Front of the M9000 Base Cabinet)
FIGURE 11-6
8. Place the removed XSCFU on an antistatic mat.
9. Mount the replacement XSCFU by following the removal instructions in
and Step 7 in reverse order. Align the XSCFU with the slot guides, insert it
carefully, and secure it firmly.
Push the levers as far as they will go, and then push the knob screws on the
eject/lock levers to lock them in position. When the knob screws remain in
position, the XSCF unit is securely mounted.
1
2
Chapter 11 XSCF Unit Replacement
1
Step 6
11-9