Component Mounting Conditions - Fujitsu SPARC Enterprise M8000 Overview Manual

FIGURE 1-11
Slot-loading type
Tray-loading type
Note – The locations of LED and button may vary depending on the servers.
The CD-RW/DVD-RW drive unit cannot be directly shared by multiple domains in a
server. However, if the multiple domains are connected to one another through a
LAN and a certain function of the Oracle Solaris OS is used, the CD-RW/DVD-RW
drive unit can be shared by the domains. Adequate consideration of security is
necessary for LAN connections between domains.
Tape Drive Unit
Contact your sales representative for tape drive unit options on M8000/M9000
servers.
1.4

Component Mounting Conditions

This section describes the component mounting conditions.
CPUMs can be added in units of two modules.
■
DIMMs can be added in units of 16 modules.
■
If you add an IOU, a CMU must be mounted for the slot with the same slot
■
number.
IOU Onboard Device Card_A (IOUA) can be mounted in PCIe Slot #0, #2, #4, and
■
#6 in the IOU.
Link cards can be mounted in PCIe Slot #1, #3, #5, and #7 in the IOU.
■
Types of CD-RW/DVD-RW Drive Unit
Chapter 1 System Overview 1-25