Emergency Stop Switch - Fujitsu S120 Series Operating Manual

EMERGENCY STOP switch

4.2 EMERGENCY STOP switch
The Business Server cabinet has an EMERGENCY STOP switch (UNIT EMERGENCY
POWER OFF).
If you wish to cut power to the entire system, the EMERGENCY STOP switch must be
pressed.
Figure 7: EMERGENCY STOP switch on the S120 Business Server cabinet
!
Use the EMERGENCY STOP switch as follows:
Ê Open the transparent switch cover.
Ê Press the red switch downwards to the O position.
18
The switch should only be used in emergencies.
The switch can only be reset by the service department. The system can only be
switched back on after the switches has been reset.
UNIT
EMERGENCY
I
o
POWER
OFF
S120 Business Server
Controls and indicators
U41182-J-Z126-1-74