Table of Contents
Advertisement
Precautions
User's Manual
1. Preprinting
When printing using a color with a reflection factor of 60 percent
or less, such as black, do not print in the shaded area shown in the
figure below.
30 mm
(1.18 in)
10 mm (0.4 in)
First character
Important:
The printer uses an autosensor to detect loaded paper in the shaded
area. If the area is preprinted in black, the sensor may fail to detect the
paper because of decreased light reflection.
Perform preprinting as follows:
a. Do not print horizontal lines thicker than 8 mm (0.3 in)
Preprinting-inhibited area
8 mm (0.3 in) or less
Precautions
PAPER
SPECIFICATIONS
7-15
Advertisement
Table of Contents
