Fujitsu DL6400Pro User Manual page 223

Using the Setup Menus
Func. Item
MENU1 QUALITY
Func. Item
SAVE
NOTE: Values have been
permanently saved.
Func. Item
SAVE
E-18
With the first method, the printer remains in setup mode after saving
the changes, allowing you to use different functions in setup mode.
With the other methods, the printer saves the changes and then exits
from setup mode and redisplays the original basic menu.
If you made changes while in setup mode, the printer prompts you to
save the changes. You can save changes permanently or temporarily.
Permanent changes become the printer's new default settings.
Temporary changes are lost when the printer is turned off.
Using the SAVE function
The SAVE function permanently saves changed options. Use SAVE
when you want to select another function after saving. To use the
SAVE function, follow these steps:
1. Make sure the printer is in setup mode. If you just
Option
completed the previous exercise, the printer is in
DRAFT
setup mode with the menu shown at the left.
2. Press F1 until SAVE appears under Func.
Option
GO
3. Press F3 to execute the SAVE function. If the op-
tions have been changed, the save execution mes-
sage briefly appears, indicating the changed
options are now permanently saved. Then the
original SAVE menu reappears. If the options
Option
were not changed, the original SAVE menu sim-
GO
ply reappears.
4. If you want, select another function.
If you are working through the exercises, after completing the exercise
on the SAVE function go to the SELF-TEST function on page E-20.
User's Manual