Table of Contents
Advertisement
User's Manual
3. Characteristics of paper with the number of parts in brackets [ ]
may differ slightly with the manufacturer and should be tested
carefully before use.
4. Paper used for continuous forms differs depending on whether it is
loaded from the front or from the back of the printer. The paper
specifications in Table 7-1 are for forms loaded from the front.
5. The total thickness of multipart paper must not exceed 0.65 mm
(0.025 in).
3. Binding
Select a binding type from Table 7-2.
Table 7–2 Binding for continuous forms with two to six parts
Binding
Double-sided glued multipart
forms (zigzag spot gluing)
Double-sided paper staples
Continuous Forms
Remarks
Recommended because:
• Forms remain flexible.
• Parts do not separate or
become misaligned easily.
The more parts, the easier the
parts separate or become
misaligned.
PAPER
SPECIFICATIONS
7-3
Advertisement
Table of Contents
