Power-On Special Functions - Fujitsu DL6400Pro User Manual

Power-on Special Functions

EXIT: Use temporarily?
USE SAVE
Form Tear off
feed paper
Power-on
Special
Functions
Buttons pressed during power on
ONLINE
F1
F1
F1
E-22
8. Press ONLINE to save the settings. The prompt
Not-exit
9. To save the settings temporarily, press F1. To save
Line
feed
Table E-1 lists functions you can execute by pressing the ONLINE or
F1 to F3 control panel buttons while turning on the power. Keep the
buttons pressed until the buzzer sounds. Use only the combinations of
buttons listed here. If you make a mistake (the printer displays a
message not listed in the table), turn the power off without responding
affirmatively to the message.
Table E–1 Power-on special functions
Function
Vertical alignment
Printing self-test
F2 Printing demonstration
F2 Printing hexadecimal dump
F2 F3 Option listing
message shown at the left appears.
the settings permanently, press F2.
A save execution message appears and then the
original basic menu is redisplayed.
Initial message
Vertical alignment print
Self-test print
DEMO pattern printing
Hex dump mode
Setup values listing
User's Manual