Fujitsu DL6400Pro User Manual page 84

Activating Setup Mode
SETUP MODE
(GAP-ADJ is printed only with APTC installed.)
Figure 8–1 Initial setup mode printout
The initial printout contains a header, help menu, and
<<FUNCTION>> menu. The header shows that the printer is offline
and in setup mode. The help menu summarizes setup mode
operations. The <<FUNCTION>> menu lists all functions available in
setup mode. Note that the yellow arrow on the print head is initially
below the SAVE&END function.
Another way to enter setup mode is to turn off the printer and then
turn it on again while pressing the FONT and MENU buttons.
Continue pressing the buttons until the printer beeps.
User's Manual 8-3