Fujitsu DL6400Pro User Manual page 230

User's Manual
Table E–2 Printer status messages (Continued)
Message
Online setup mode
Page length = xx.x inch
Paper still remains
Printing
RESET: Are you sure?
No Yes
Save top adjust now!
Self-test printing
EXIT STOP GO
Setup values listing
Meaning
This message appears when a
computer command places the
printer in setup mode. It is the
opening message of online setup
mode. Printer status information
appears in the lower line of the
display.
This message appears briefly when a
form feed is executed. It indicates
the length of paper moved per form
feed.
When unloading continuous forms,
paper was not retracted all the way
to the tractor. Tear off the
continuous forms.
The printer is online and printing.
The printer is ready to reset itself.
Press F3 to reset the printer. The
buffer is cleared.
This message briefly appears when
the adjusted top-of-form position is
permanently saved in the printer.
Line 001 is set at the current
position on the page.
The printer is printing or ready to
print its self-test pattern, used to
check print quality. Press F1 to exit
the self-test. Press F2 to pause
printing. Press F3 to start or restart
printing.
The printer is printing a page
listing its currently set default
values.
Messages
USING THE
LCD/LED TYPE
CONTROL PANEL
E-25