Fujitsu DL6400Pro User Manual page 116

<<FUNCTION>>
SAVE&END MENU1 MENU2
V-ALMNT GAP-ADJ
<TEAROFF> MANUAL
User's Manual
To change printer configuration options, check that continuous forms
are loaded. Then do the following:
1. Enter setup mode.
Place the printer offline and then press FONT and MENU
simultaneously. Wait for the printer to stop printing and check that
the <<FUNCTION>> menu is printed.
HARDWRE ADJUST CONFIG
(GAP-ADJ is printed only with APTC installed.)
2. Select CONFIG.
Repeatedly press LOCK to position the yellow arrow on the print
head beneath CONFIG. Press FONT to select the CONFIG
function and print the <TEAROFF> options.
AUTO
3. Select an option.
Press LOCK to move the yellow arrow to select an option. Press
FONT to select the option and print the next item.
Important:
To print the previous item, press MENU.
4. Exit CONFIG.
Press ONLINE and reprint the <<FUNCTION>> menu.
5. Either select another function or exit setup mode, saving changes.
To exit setup mode and save changes, check that the yellow arrow
on the print head is positioned beneath SAVE&END. Then press
FONT or MENU.
Changing Configuration Options
DEFAULT LIST SELF-TST HEX-DUMP
SETUP MODE
8-35