Table of Contents
Advertisement
Messages
E-24
Table E–2 Printer status messages (Continued)
Message
Internal test
Line count = xxx
Loading/Unloading paper
NOTE: Values are lost if
power is turned off.
NOTE: Values have been
permanently saved.
Now resetting
Offline setup mode
Offset (n/180") = xxxx
Meaning
The printer is performing its
internal hardware test. This message
appears for 2 seconds immediately
after the printer is turned on.
This message appears briefly when a
line feed is executed. It indicates the
new line position for printing,
where line 001 is the top-of-form
position.
The printer is loading paper to the
print position or unloading paper
to the tractor.
This message appears when you exit
setup mode by selecting USE,
which temporarily save the changes
you made. When you turn the
printer off, the changes are lost.
This message appears when you exit
setup mode by selecting SAVE,
which permanently saves the
changes you made, making them
the printer's new power-on default
settings.
The printer is clearing its print
buffer and resetting itself for
printing.
This message appears briefly when
you enter setup mode using the
control panel. It is the opening
message of offline setup mode.
This message briefly appears when a
micro line feed is executed. It
indicates the offset from the current
print line in units of 1/180 inch,
where xxxx is –128 to +127.
User's Manual
Advertisement
Table of Contents
