Restoring The Network Configuration; Resetting The Network Interface Card - Dell 1600n Multifunction Mono Laser Printer User Manual

To assign the TCP/IP address automatically using a DHCP or BOOTP server on your network, take the
following steps:
1. Press <Menu> until you see "Network Setup" on the bottom line of the display.
2. Press the scroll button ( or
3. Press the scroll button ( or
4. Press the scroll button ( or
5. To assign the address from the BOOTP server, press <Select> when "BOOTP" displays on the bottom
line.

Restoring the Network Configuration

You can return the network configuration to its default settings.
1. Press <Menu> until you see "Network Setup" on the bottom line of the display.
2. Press the scroll button ( or
3. Press <Select>.
The first available menu item, "Yes" displays on the bottom line.
4. Press <Select> to restore the network configuration.
5. Power the multi-function printer off and back on or reset the network interface card.

Resetting the Network Interface Card

You can reset the network interface card when a network problems occurs.
1. Press <Menu> until you see "Network Setup" on the bottom line of the display.
The first available item, "Reset NIC", displays on the bottom line.
2. Press <Select>.
The first available menu item, "Yes" displays on the bottom line.
3. Press <Select> to reset the network interface card.
) until "Configuration" displays on the bottom line. Press <Select>.
) to display "TCP/IP" and press <Select>.
) to display "DHCP" on the bottom line and press <Select>.
) until "Clear Setting" displays on the bottom line.