Dell 1600n Multifunction Mono Laser Printer User Manual page 89

To make the Two Sided copying:
1. Load the document to be copied on the scanner glass, and close the cover.
2. Press <Layout>.
3. Press <Layout> or the scroll button ( or
4. Press <Select> to save the selection.
5. If necessary, customize the copy settings including the number of copies, copy size, contrast, and
image quality by using the operator panel buttons. See
6. Press <Start Copy> to begin copying.
Your multi-function printer begins scanning the front side.
7. When "Set Backside" displays on the bottom line, open the document cover and flip the document over
with the second side facing down. Close the document cover.
NOTE: If you press the <Cancel> button or if no buttons are pressed for about 30 seconds, the
multi-function printer cancels the copy job and returns to Standby mode.
8. Press <Start Copy> again.
2-up or 4-up Copying
The 2 or 4-up copying feature is available only when you load documents in the ADF.
NOTE: You cannot adjust the copy size using the <Reduce/Enlarge> (
or 4-up copy.
) until "2 Sided" displays on the bottom line.
"Setting Copy Options" on page 98.
or ) button for making a 2