Stop-Grant State; Processor Low Power State Machine - Intel 520J - Pentium 4 2.80GHz 800MHz 1MB Socket 775 CPU Datasheet

Figure 6-1. Processor Low Power State Machine
Normal State
Normal execution

Stop-Grant State

BCLK running
Snoops and interrupts allowed
6.2.3 Stop-Grant State
When the STPCLK# signal is asserted, the Stop-Grant state of the processor is entered 20 bus
clocks after the response phase of the processor-issued Stop Grant Acknowledge special bus cycle.
Since the GTL+ signals receive power from the FSB, these signals should not be driven (allowing
the level to return to V
addition, all other input signals on the FSB should be driven to the inactive state.
BINIT# will not be serviced while the processor is in Stop-Grant state. The event will be latched
and can be serviced by software upon exit from the Stop Grant state.
RESET# will cause the processor to immediately initialize itself, but the processor will stay in
Stop-Grant state. A transition back to the Normal state will occur with the de-assertion of the
STPCLK# signal.
A transition to the HALT/Grant Snoop state will occur when the processor detects a snoop on the
FSB (see
While in the Stop-Grant State, SMI#, INIT#, BINIT# and LINT[1:0] will be latched by the
processor, and only serviced when the processor returns to the Normal State. Only one occurrence
of each event will be recognized upon return to the Normal state.
While in Stop-Grant state, the processor will process a FSB snoop.
Datasheet
STPCLK#
STPCLK#
Asserted De-asserted
) for minimum power drawn by the termination resistors in this state. In
TT
Section 6.2.3).
HALT or MWAIT Instruction and
HALT Bus Cycle Generated
INIT#, BINIT#, INTR, NMI, SMI#,
RESET#, FSB interrupts
Snoop Event Occurs
Snoop Event Serviced
Features
Enhanced HALT or HALT State
BCLK running
Snoops and interrupts allowed
Snoop Snoop
Event Event
Occurs Serviced
HALT Snoop State
BCLK running
Service snoops to caches
Grant Snoop State
BCLK running
Service snoops to caches
87