Tray Module Lower Transport Motor Removal - Lexmark C950 Service Manual

Remove the foot cover.
3.
4. Remove the two screws (B).
Note: Opening the tray module left door will help you remove the tray module left cover.
Remove the tray module left cover.
5.

Tray module lower transport motor removal

This removal procedure is not applicable to TTM tray modules.
Remove the tray module rear cover. See
1.
Disconnect the cable (A).
2.
3. Release the harness from the clamp (B).
"Tray module rear cover removal" on page
5058-030
4-211.
Repair information
4-207
Previous
Next
Go Back