Fuser Envelope Conditioner Solenoid Removal - Lexmark T520 Service Manual

Infoprint 1120 and 1125

Fuser Envelope Conditioner Solenoid Removal

1. Remove the fuser assembly.
2. Disconnect the solenoid cable from the fuser board.
3. Remove the solenoid mounting screw (A).
4. Disconnect the solenoid link (B).
5. Remove the solenoid from the fuser assembly.
Note: Perform the
whenever you replace the fuser solenoid.
"Fuser Solenoid Adjustment" on page 4-3
Repair Information
4-33