Developer Housing (K) Removal - Lexmark C950 Service Manual

Move the appropriate wiper in and out to clean the printhead.
•

Developer housing (K) removal

1. Remove the printer front door. See
Remove the transfer belt cleaner. See
2.
Remove the waste toner box.
3.
Remove the four photoconductor units.
4.
Remove the four toner supplies.
5.
6. Remove the operator panel front cover.
Remove the printhead retract door. See
7.
Remove the inner cover. See
8.
Remove the inner plate. See
9.
Remove the ATC sensor PCB bracket. See
10.
11. Remove the waste toner auger chute. See
Lift the appropriate plastic gate, and push it in to reduce toner spillage.
12.
"Printer front door removal" on page
"Transfer belt cleaner removal" on page
"Printhead retract door removal" on page
"Inner cover removal" on page
"Inner plate removal" on page
"ATC sensor PCB bracket removal" on page
"Waste toner auger chute removal" on page
4-10.
4-172.
4-139.
4-3.
4-92.
Repair information
5058-030
Previous
Next
Go Back
4-25.
4-188.
4-51