Hcf Top Cover Removal - Lexmark C950 Service Manual

Remove the four screws securing the separation roll shaft assembly (A) to the media feed unit assembly
6.
(B).
7. Remove the separation roll shaft assembly (A).
Note: The HCF media feed unit assembly (B) becomes detached from the separation roll shaft assembly
(A) at the hinge point.
Note: Before re-installing the separation roll shaft assembly (A), ensure the HCF media feed unit assembly (B)
is re-attached at the two hinge points.

HCF top cover removal

Pull out the HCF media tray.
1.
Remove the four screws securing the HCF top cover (B).
2.
B
A
5058-030
Repair information
4-377
Previous
Next
Go Back