Lexmark C950 Service Manual page 58

5058-030
User status and attendance messages
User primary message Explanation
61 Remove defective
disk
62 Disk full
63 Unformatted disk
80.xx Fuser life warning
80 Replace fuser
80 Replace paper pick
rollers in [paper source],
use parts and
instructions in tray 1
compartment
80 Scheduled
maintenance [x]
82.xx Replace waste
toner bottle
82.xx Waste toner bottle
missing
82.xx Waste toner bottle
nearly full
84 unsupported [color]
photoconductor
84.xx [color]
photoconductor missing
84.xx [color]
photoconductor nearly
low
84.xx [color]
photoconductor low
Service Manual
2-10
Try one or more of the following:
• Touch Continue to clear the message and continue printing.
• Install a different printer hard disk before performing any operations that require
a printer hard disk.
Try one or more of the following:
• Touch Continue to clear the message and continue processing.
• Delete fonts, macros, and other data stored on the printer hard disk.
• Install a printer hard disk with larger capacity.
Try one or more of the following:
• Touch Continue to clear the message and continue printing.
• Format the printer hard disk.
If the error message remains, the hard disk may be defective and require
replacing.
• Order a replacement fuser immediately. When print quality is reduced, install
the new fuser, following the instruction sheet that came with the replacement
part.
• Touch Continue to clear the message and continue printing.
1. Replace the fuser using the instruction sheet that came with the replacement
part.
2. Touch Continue to clear the message and continue printing.
Try one or more of the following:
• Touch Continue and replace later to ignore the message and continue
printing.
Note: Worn or defective paper pick rollers may cause paper jams.
• Replace the worn or defective paper pick rollers, and then touch Rollers
replaced to clear the message and continue printing.
Contact customer support, and report the message. The printer is scheduled for
maintenance.
1. Replace the waste toner bottle.
For instructions on replacing the waste toner bottle, from the printer control
panel touch More Information.
2. Touch Continue to clear the message and continue printing.
Reinsert the waste toner bottle into the printer.
Order a replacement waste toner bottle immediately.
1. Replace the waste toner bottle.
For instructions on installing the waste toner bottle, from the printer control
panel touch More Information.
2. Touch Continue to clear the message and continue printing.
Remove the specified photoconductor, and then install a supported one.
Install the specified color photoconductor, following the instruction sheet that came
with the replacement part.
1. Order a replacement photoconductor.
2. When print quality is reduced, install the new photoconductor, following the
instruction sheet that came with the replacement part.
3. Touch Continue to clear the message and continue printing.
1. Order a replacement photoconductor immediately.
2. When print quality is reduced, install the new photoconductor, following the
instruction sheet that came with the replacement part.
3. Touch Continue to clear the message and continue printing.
Previous
Next
Go Back