Setup; Wireless Setup - D-Link DIR-505L User Manual

Section 3 - Configuration
Wireless Network
Service Set Identifier (SSID) is the name of your wireless network.
Name:
Create a name using up to 32 characters. The SSID is case-
sensitive.
Wireless Mode:
Select one of the following:
802.11g Only - Select if all of your wireless clients are 802.11g.
802.11n Only - Select only if all of your wireless clients are
802.11n.
Mixed 802.11n and 802.11g - Select if you are using a mix of
802.11n and 11g wireless clients.
Enable Auto
The Auto Channel Scan setting can be selected to allow the
Channel Scan:
DIR-505L to choose the channel with the least amount of
interference.
Wireless
Indicates the channel setting for the DIR-505L. By default the
Channel:
channel is set to 6. The Channel can be changed to fit the channel
setting for an existing wireless network or to customize the
wireless network. If you enable Auto Channel Scan, this option
will be greyed out.
Channel Width:
Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using
both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
40MHz - Select if using only 802.11n wireless clients.
Visibility
Select Invisible if you do not want the SSID of your wireless
Status: network to be broadcasted by the DIR-505L. If Invisible is
selected, the SSID of the DIR-505L will not be seen by Site Survey
utilities so your wireless clients will have to know the SSID of
your DIR-505L.
D-Link DIR-505L User Manual

Setup

Wireless Setup

83