Internet Settings - D-Link DIR-505L User Manual

Section 3 - Configuration
This section will allow you to change the local network settings of the access point and to configure the DHCP settings.
My Internet
Use the drop-down menu to select Dynamic IP (DHCP) to
Connection is:
automatically obtain an IP address on the LAN/private
network.
Host Name:
The Host Name is optional but may be required by some
ISPs. Leave blank if you are not sure.
MTU:
Maximum Transmission Unit - you may need to change
the MTU for optimal performance with your specific ISP.
1500 is the default MTU.
MAC Address:
The default MAC address is set to the Internet port's
physical interface MAC address on the Broadband Router.
It is not recommended that you change the default MAC
address unless required by your ISP. You can use the
Clone Your PC's MAC Address button to replace the
Internet port's MAC address with the MAC address of
your Ethernet card.
Wi-Fi Protected
Select to enable this feature.
Setup:
Process WPS:
Refer to page 141 for more information.
D-Link DIR-505L User Manual

Internet Settings

125