Connect A Wireless Client To Your Router; Wps Button - D-Link DIR-505L User Manual

Section 4 - Security

Connect a Wireless Client to your Router

The easiest and most secure way to connect your wireless devices to the router is through WPS (Wi-Fi Protected Setup). Most
wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS
button (or a software utility with WPS) that you can press to connect to the DIR-505L router. Please refer to your user manual
for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps
below:
Step 1 - Press the WPS button on the DIR-505L for about one second. The WPS button will start to blink.
Step 2 - Within two minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS
process).
Step 3 - Allow up to one minute to configure. Once the WPS light stops blinking, you will be connected and your wireless
connection will be secure with WPA2.
D-Link DIR-505L User Manual

WPS Button

141