System - D-Link DIR-505L User Manual

Section 3 - Configuration
This section allows you to manage the router's configuration settings, reboot the router, and restore the router to the factory
default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you've created.
Save Settings
Use this option to save the current router configuration
to Local Hard
settings to a file on the hard disk of the computer you
Drive: are using. First, click the Save button. A file dialog will
appear, allowing you to select a location and file name
for the settings.
Load Settings Use this option to load previously saved router
from Local configuration settings. First, use the Browse option to
Hard Drive: find a previously saved file of configuration settings. Then,
click the Upload Settings button below to transfer those
settings to the router.
Restore to This option will restore all configuration settings back
Factory Default to the settings that were in effect at the time the router
Settings: was shipped from the factory. Any settings that have
not been saved will be lost, including any rules that
you have created. If you want to save the current router
configuration settings, use the Save button above.
Reboot The
Device: Click to reboot the router.
Remove If you previously installed a language pack and want to
Language revert all the menus on the router interface back to the
Pack: default language settings, click the Clear button.
D-Link DIR-505L User Manual

System

70