Manual Setup; Router/Access Point Mode - D-Link DIR-505L User Manual

Section 2 - Installation
1. Find an outlet close to an Internet-enabled device. Then, move
the switch to "Router/AP Mode" and plug the DIR-505L into a wall
outlet. Verify that the power LED has turned green.
2. Connect one end of an Ethernet cable into the Ethernet port of the
Internet-enabled device (such as a modem or Ethernet port in a
hotel) and then plug the other end of this cable into the Ethernet
port of the DIR-505L.
3. From your laptop or mobile device go to your Wireless Utility to
display the available wireless networks and select the Wi-Fi name
that is displayed on your companion card (ex: dlink-a8fa). Then,
enter the Wi-Fi password included on your card (akbdj1936).
D-Link DIR-505L User Manual

Manual Setup

Router/Access Point Mode

Router/AP
Outlet
D-Link DIR-505 Mobile Companion Wi-Fi Configuration Note
Web browser link:
http://dlinkrouter or
http:// 192.168.0.1
Default configuration
Username: "Admin"
Password: "" (leave the field blank)
Wi- Fi Name (SSID) :
54mm
dlinka8fa
Wi-Fi Password :
akbdj19368
Ethernet
90mm
Web browser link:
http://dlinkrouter or
http:// 192.168.0.1
Your configuration
Username: Admin
Password:
Wi- Fi Name (SSID) :
Wi-Fi Password :
13